File ecp.h

This file provides an API for Elliptic Curves over GF(P) (ECP).

The use of ECP in cryptography and TLS is defined in Standards for Efficient Cryptography Group (SECG): SEC1 Elliptic Curve Cryptography and RFC-4492: Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS).

RFC-2409: The Internet Key Exchange (IKE) defines ECP group types.

Defines

MBEDTLS_ERR_ECP_BAD_INPUT_DATA: Bad input parameters to function.

MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL: The buffer is too small to write to.

MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE: The requested feature is not available, for example, the requested curve is not supported.

MBEDTLS_ERR_ECP_VERIFY_FAILED: The signature is not valid.

MBEDTLS_ERR_ECP_ALLOC_FAILED: Memory allocation failed.

MBEDTLS_ERR_ECP_RANDOM_FAILED: Generation of random value, such as ephemeral key, failed.

MBEDTLS_ERR_ECP_INVALID_KEY: Invalid private or public key.

MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH: The buffer contains a valid signature followed by more data.

MBEDTLS_ERR_ECP_IN_PROGRESS: Operation in progress, call again with the same parameters to continue.

MBEDTLS_ECP_SHORT_WEIERSTRASS_ENABLED

MBEDTLS_ECP_MONTGOMERY_ENABLED

MBEDTLS_ECP_DP_MAX: The number of supported curves, plus one for MBEDTLS_ECP_DP_NONE.

MBEDTLS_ECP_MAX_BITS: The maximum size of the groups, that is, of N and P.

MBEDTLS_ECP_MAX_BYTES

MBEDTLS_ECP_MAX_PT_LEN

MBEDTLS_ECP_OPS_CHK: basic ops count for ecp_check_pubkey()

MBEDTLS_ECP_OPS_DBL: basic ops count for ecp_double_jac()

MBEDTLS_ECP_OPS_ADD: basic ops count for see ecp_add_mixed()

MBEDTLS_ECP_OPS_INV: empirical equivalent for mpi_mod_inv()

MBEDTLS_ECP_BUDGET(ops)

MBEDTLS_ECP_PF_UNCOMPRESSED: The uncompressed point format for Short Weierstrass curves (MBEDTLS_ECP_DP_SECP_XXX and MBEDTLS_ECP_DP_BP_XXX).

MBEDTLS_ECP_PF_COMPRESSED: The compressed point format for Short Weierstrass curves (MBEDTLS_ECP_DP_SECP_XXX and MBEDTLS_ECP_DP_BP_XXX).

Warning

While this format is supported for all concerned curves for writing, when it comes to parsing, it is not supported for all curves. Specifically, parsing compressed points on MBEDTLS_ECP_DP_SECP224R1 and MBEDTLS_ECP_DP_SECP224K1 is not supported.

MBEDTLS_ECP_TLS_NAMED_CURVE: The named_curve of ECCurveType.

Typedefs

typedef struct mbedtls_ecp_curve_info mbedtls_ecp_curve_info

Curve information, for use by other modules.

The fields of this structure are part of the public API and can be accessed directly by applications. Future versions of the library may add extra fields or reorder existing fields.

typedef struct mbedtls_ecp_point mbedtls_ecp_point: The ECP point structure, in Jacobian coordinates.

Note

All functions expect and return points satisfying the following condition: Z == 0 or Z == 1. Other values of Z are used only by internal functions. The point is zero, or “at infinity”, if Z == 0. Otherwise, X and Y are its standard (affine) coordinates.

typedef struct mbedtls_ecp_restart_mul mbedtls_ecp_restart_mul_ctx: Internal restart context for multiplication.

Note

Opaque struct

typedef struct mbedtls_ecp_restart_muladd mbedtls_ecp_restart_muladd_ctx: Internal restart context for ecp_muladd()

Note

Opaque struct

typedef struct mbedtls_ecp_keypair mbedtls_ecp_keypair

The ECP key-pair structure.

A generic key-pair that may be used for ECDSA and fixed ECDH, for example.

Note

Members are deliberately in the same order as in the mbedtls_ecdsa_context structure.

Enums

enum mbedtls_ecp_group_id

Domain-parameter identifiers: curve, subgroup, and generator.

Note

Only curves over prime fields are supported.

Warning

This library does not support validation of arbitrary domain parameters. Therefore, only standardized domain parameters from trusted sources should be used. See mbedtls_ecp_group_load().

Values:

enumerator MBEDTLS_ECP_DP_NONE: Curve not defined.

enumerator MBEDTLS_ECP_DP_SECP192R1: Domain parameters for the 192-bit curve defined by FIPS 186-4 and SEC1.

enumerator MBEDTLS_ECP_DP_SECP224R1: Domain parameters for the 224-bit curve defined by FIPS 186-4 and SEC1.

enumerator MBEDTLS_ECP_DP_SECP256R1: Domain parameters for the 256-bit curve defined by FIPS 186-4 and SEC1.

enumerator MBEDTLS_ECP_DP_SECP384R1: Domain parameters for the 384-bit curve defined by FIPS 186-4 and SEC1.

enumerator MBEDTLS_ECP_DP_SECP521R1: Domain parameters for the 521-bit curve defined by FIPS 186-4 and SEC1.

enumerator MBEDTLS_ECP_DP_BP256R1: Domain parameters for 256-bit Brainpool curve.

enumerator MBEDTLS_ECP_DP_BP384R1: Domain parameters for 384-bit Brainpool curve.

enumerator MBEDTLS_ECP_DP_BP512R1: Domain parameters for 512-bit Brainpool curve.

enumerator MBEDTLS_ECP_DP_CURVE25519: Domain parameters for Curve25519.

enumerator MBEDTLS_ECP_DP_SECP192K1: Domain parameters for 192-bit “Koblitz” curve.

enumerator MBEDTLS_ECP_DP_SECP224K1: Domain parameters for 224-bit “Koblitz” curve.

enumerator MBEDTLS_ECP_DP_SECP256K1: Domain parameters for 256-bit “Koblitz” curve.

enumerator MBEDTLS_ECP_DP_CURVE448: Domain parameters for Curve448.

enum mbedtls_ecp_curve_type

Values:

enumerator MBEDTLS_ECP_TYPE_NONE

enumerator MBEDTLS_ECP_TYPE_SHORT_WEIERSTRASS

enumerator MBEDTLS_ECP_TYPE_MONTGOMERY

Functions

int mbedtls_ecp_check_budget(const mbedtls_ecp_group *grp, mbedtls_ecp_restart_ctx *rs_ctx, unsigned ops)

Internal; for restartable functions in other modules. Check and update basic ops budget.

Parameters

grp – Group structure
rs_ctx – Restart context
ops – Number of basic ops to do

Returns

0 if doing ops basic ops is still allowed,

Returns

MBEDTLS_ERR_ECP_IN_PROGRESS otherwise.

void mbedtls_ecp_set_max_ops(unsigned max_ops)

Set the maximum number of basic operations done in a row.

             If more operations are needed to complete a computation,
             #MBEDTLS_ERR_ECP_IN_PROGRESS will be returned by the
             function performing the computation. It is then the
             caller's responsibility to either call again with the same
             parameters until it returns 0 or an error code; or to free
             the restart context if the operation is to be aborted.

             It is strictly required that all input parameters and the
             restart context be the same on successive calls for the
             same operation, but output parameters need not be the
             same; they must not be used until the function finally
             returns 0.

             This only applies to functions whose documentation
             mentions they may return #MBEDTLS_ERR_ECP_IN_PROGRESS (or
             #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS for functions in the
             SSL module). For functions that accept a "restart context"
             argument, passing NULL disables restart and makes the
             function equivalent to the function with the same name
             with \c _restartable removed. For functions in the ECDH
             module, restart is disabled unless the function accepts
             an "ECDH context" argument and
             mbedtls_ecdh_enable_restart() was previously called on
             that context. For function in the SSL module, restart is
             only enabled for specific sides and key exchanges
             (currently only for clients and ECDHE-ECDSA).

Note

A “basic operation” is defined as a rough equivalent of a multiplication in GF(p) for the NIST P-256 curve. As an indication, with default settings, a scalar multiplication (full run of mbedtls_ecp_mul()) is:

about 3300 basic operations for P-256
about 9400 basic operations for P-384

Note

Very low values are not always respected: sometimes functions need to block for a minimum number of operations, and will do so even if max_ops is set to a lower value. That minimum depends on the curve size, and can be made lower by decreasing the value of MBEDTLS_ECP_WINDOW_SIZE. As an indication, here is the lowest effective value for various curves and values of that parameter (w for short): w=6 w=5 w=4 w=3 w=2 P-256 208 208 160 136 124 P-384 682 416 320 272 248 P-521 1364 832 640 544 496

Note

This setting is currently ignored by Curve25519.

Warning

Using the PSA interruptible interfaces with keys in local storage and no accelerator driver will also call this function to set the values specified via those interfaces, overwriting values previously set. Care should be taken if mixing these two interfaces.

Parameters: max_ops – Maximum number of basic operations done in a row. Default: 0 (unlimited). Lower (non-zero) values mean ECC functions will block for a lesser maximum amount of time.

int mbedtls_ecp_restart_is_enabled(void)

Check if restart is enabled (max_ops != 0)

Returns: 0 if max_ops == 0 (restart disabled)
Returns: 1 otherwise (restart enabled)

mbedtls_ecp_curve_type mbedtls_ecp_get_type(const mbedtls_ecp_group *grp)

const mbedtls_ecp_curve_info *mbedtls_ecp_curve_list(void)

This function retrieves the information defined in mbedtls_ecp_curve_info() for all supported curves.

Note

This function returns information about all curves supported by the library. Some curves may not be supported for all algorithms. Call mbedtls_ecdh_can_do() or mbedtls_ecdsa_can_do() to check if a curve is supported for ECDH or ECDSA.

Returns: A statically allocated array. The last entry is 0.

const mbedtls_ecp_group_id *mbedtls_ecp_grp_id_list(void)

This function retrieves the list of internal group identifiers of all supported curves in the order of preference.

Note

This function returns information about all curves supported by the library. Some curves may not be supported for all algorithms. Call mbedtls_ecdh_can_do() or mbedtls_ecdsa_can_do() to check if a curve is supported for ECDH or ECDSA.

Returns: A statically allocated array, terminated with MBEDTLS_ECP_DP_NONE.

const mbedtls_ecp_curve_info *mbedtls_ecp_curve_info_from_grp_id(mbedtls_ecp_group_id grp_id)

This function retrieves curve information from an internal group identifier.

Parameters: grp_id – An MBEDTLS_ECP_DP_XXX value.
Returns: The associated curve information on success.
Returns: NULL on failure.

const mbedtls_ecp_curve_info *mbedtls_ecp_curve_info_from_tls_id(uint16_t tls_id)

This function retrieves curve information from a TLS NamedCurve value.

Parameters: tls_id – An MBEDTLS_ECP_DP_XXX value.
Returns: The associated curve information on success.
Returns: NULL on failure.

const mbedtls_ecp_curve_info *mbedtls_ecp_curve_info_from_name(const char *name)

This function retrieves curve information from a human-readable name.

Parameters: name – The human-readable name.
Returns: The associated curve information on success.
Returns: NULL on failure.

void mbedtls_ecp_point_init(mbedtls_ecp_point *pt)

This function initializes a point as zero.

Parameters: pt – The point to initialize.

void mbedtls_ecp_group_init(mbedtls_ecp_group *grp): This function initializes an ECP group context without loading any domain parameters.

Note

After this function is called, domain parameters for various ECP groups can be loaded through the mbedtls_ecp_group_load() or mbedtls_ecp_tls_read_group() functions.

void mbedtls_ecp_keypair_init(mbedtls_ecp_keypair *key)

This function initializes a key pair as an invalid one.

Parameters: key – The key pair to initialize.

void mbedtls_ecp_point_free(mbedtls_ecp_point *pt)

This function frees the components of a point.

Parameters: pt – The point to free.

void mbedtls_ecp_group_free(mbedtls_ecp_group *grp)

This function frees the components of an ECP group.

Parameters: grp – The group to free. This may be NULL, in which case this function returns immediately. If it is not NULL, it must point to an initialized ECP group.

void mbedtls_ecp_keypair_free(mbedtls_ecp_keypair *key)

This function frees the components of a key pair.

Parameters: key – The key pair to free. This may be NULL, in which case this function returns immediately. If it is not NULL, it must point to an initialized ECP key pair.

void mbedtls_ecp_restart_init(mbedtls_ecp_restart_ctx *ctx)

Initialize a restart context.

Parameters: ctx – The restart context to initialize. This must not be NULL.

void mbedtls_ecp_restart_free(mbedtls_ecp_restart_ctx *ctx)

Free the components of a restart context.

Parameters: ctx – The restart context to free. This may be NULL, in which case this function returns immediately. If it is not NULL, it must point to an initialized restart context.

int mbedtls_ecp_copy(mbedtls_ecp_point *P, const mbedtls_ecp_point *Q)

This function copies the contents of point Q into point P.

Parameters

P – The destination point. This must be initialized.
Q – The source point. This must be initialized.

Returns

0 on success.

Returns

MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.

Returns

Another negative error code for other kinds of failure.

int mbedtls_ecp_group_copy(mbedtls_ecp_group *dst, const mbedtls_ecp_group *src)

This function copies the contents of group src into group dst.

Parameters

dst – The destination group. This must be initialized.
src – The source group. This must be initialized.

Returns

0 on success.

Returns

MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.

Returns

Another negative error code on other kinds of failure.

int mbedtls_ecp_set_zero(mbedtls_ecp_point *pt)

This function sets a point to the point at infinity.

Parameters: pt – The point to set. This must be initialized.
Returns: 0 on success.
Returns: MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
Returns: Another negative error code on other kinds of failure.

int mbedtls_ecp_is_zero(mbedtls_ecp_point *pt)

This function checks if a point is the point at infinity.

Parameters: pt – The point to test. This must be initialized.
Returns: 1 if the point is zero.
Returns: 0 if the point is non-zero.
Returns: A negative error code on failure.

int mbedtls_ecp_point_cmp(const mbedtls_ecp_point *P, const mbedtls_ecp_point *Q)

This function compares two points.

Note

This assumes that the points are normalized. Otherwise, they may compare as “not equal” even if they are.

Parameters

P – The first point to compare. This must be initialized.
Q – The second point to compare. This must be initialized.

Returns

0 if the points are equal.

Returns

MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the points are not equal.

int mbedtls_ecp_point_read_string(mbedtls_ecp_point *P, int radix, const char *x, const char *y)

This function imports a non-zero point from two ASCII strings.

Parameters

P – The destination point. This must be initialized.
radix – The numeric base of the input.
x – The first affine coordinate, as a null-terminated string.
y – The second affine coordinate, as a null-terminated string.

Returns

0 on success.

Returns

An MBEDTLS_ERR_MPI_XXX error code on failure.

int mbedtls_ecp_point_write_binary(const mbedtls_ecp_group *grp, const mbedtls_ecp_point *P, int format, size_t *olen, unsigned char *buf, size_t buflen)

This function exports a point into unsigned binary data.

Parameters

grp – The group to which the point should belong. This must be initialized and have group parameters set, for example through mbedtls_ecp_group_load().
P – The point to export. This must be initialized.
format – The point format. This must be either MBEDTLS_ECP_PF_COMPRESSED or MBEDTLS_ECP_PF_UNCOMPRESSED. (For groups without these formats, this parameter is ignored. But it still has to be either of the above values.)
olen – The address at which to store the length of the output in Bytes. This must not be NULL.
buf – The output buffer. This must be a writable buffer of length buflen Bytes.
buflen – The length of the output buffer buf in Bytes.

Returns

0 on success.

Returns

MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL if the output buffer is too small to hold the point.

Returns

MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the point format or the export for the given group is not implemented.

Returns

Another negative error code on other kinds of failure.

int mbedtls_ecp_point_read_binary(const mbedtls_ecp_group *grp, mbedtls_ecp_point *P, const unsigned char *buf, size_t ilen)

This function imports a point from unsigned binary data.

Note

This function does not check that the point actually belongs to the given group, see mbedtls_ecp_check_pubkey() for that.

Note

For compressed points, see MBEDTLS_ECP_PF_COMPRESSED for limitations.

Parameters

grp – The group to which the point should belong. This must be initialized and have group parameters set, for example through mbedtls_ecp_group_load().
P – The destination context to import the point to. This must be initialized.
buf – The input buffer. This must be a readable buffer of length ilen Bytes.
ilen – The length of the input buffer buf in Bytes.

Returns

0 on success.

Returns

MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the input is invalid.

Returns

MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.

Returns

MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the import for the given group is not implemented.

int mbedtls_ecp_tls_read_point(const mbedtls_ecp_group *grp, mbedtls_ecp_point *pt, const unsigned char **buf, size_t len)

This function imports a point from a TLS ECPoint record.

Note

On function return, *buf is updated to point immediately after the ECPoint record.

Parameters

grp – The ECP group to use. This must be initialized and have group parameters set, for example through mbedtls_ecp_group_load().
pt – The destination point.
buf – The address of the pointer to the start of the input buffer.
len – The length of the buffer.

Returns

0 on success.

Returns

An MBEDTLS_ERR_MPI_XXX error code on initialization failure.

Returns

MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid.

int mbedtls_ecp_tls_write_point(const mbedtls_ecp_group *grp, const mbedtls_ecp_point *pt, int format, size_t *olen, unsigned char *buf, size_t blen)

This function exports a point as a TLS ECPoint record defined in RFC 4492, Section 5.4.

Parameters

grp – The ECP group to use. This must be initialized and have group parameters set, for example through mbedtls_ecp_group_load().
pt – The point to be exported. This must be initialized.
format – The point format to use. This must be either MBEDTLS_ECP_PF_COMPRESSED or MBEDTLS_ECP_PF_UNCOMPRESSED.
olen – The address at which to store the length in Bytes of the data written.
buf – The target buffer. This must be a writable buffer of length blen Bytes.
blen – The length of the target buffer buf in Bytes.

Returns

0 on success.

Returns

MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the input is invalid.

Returns

MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL if the target buffer is too small to hold the exported point.

Returns

Another negative error code on other kinds of failure.

int mbedtls_ecp_group_load(mbedtls_ecp_group *grp, mbedtls_ecp_group_id id)

This function sets up an ECP group context from a standardized set of domain parameters.

Note

The index should be a value of the NamedCurve enum, as defined in RFC-4492: Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS), usually in the form of an MBEDTLS_ECP_DP_XXX macro.

Parameters

grp – The group context to setup. This must be initialized.
id – The identifier of the domain parameter set to load.

Returns

0 on success.

Returns

MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if id doesn’t correspond to a known group.

Returns

Another negative error code on other kinds of failure.

int mbedtls_ecp_tls_read_group(mbedtls_ecp_group *grp, const unsigned char **buf, size_t len)

This function sets up an ECP group context from a TLS ECParameters record as defined in RFC 4492, Section 5.4.

Note

The read pointer buf is updated to point right after the ECParameters record on exit.

Parameters

grp – The group context to setup. This must be initialized.
buf – The address of the pointer to the start of the input buffer.
len – The length of the input buffer *buf in Bytes.

Returns

0 on success.

Returns

MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid.

Returns

MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the group is not recognized.

Returns

Another negative error code on other kinds of failure.

int mbedtls_ecp_tls_read_group_id(mbedtls_ecp_group_id *grp, const unsigned char **buf, size_t len)

This function extracts an elliptic curve group ID from a TLS ECParameters record as defined in RFC 4492, Section 5.4.

Note

The read pointer buf is updated to point right after the ECParameters record on exit.

Parameters

grp – The address at which to store the group id. This must not be NULL.
buf – The address of the pointer to the start of the input buffer.
len – The length of the input buffer *buf in Bytes.

Returns

0 on success.

Returns

MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid.

Returns

MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the group is not recognized.

Returns

Another negative error code on other kinds of failure.

int mbedtls_ecp_tls_write_group(const mbedtls_ecp_group *grp, size_t *olen, unsigned char *buf, size_t blen)

This function exports an elliptic curve as a TLS ECParameters record as defined in RFC 4492, Section 5.4.

Parameters

grp – The ECP group to be exported. This must be initialized and have group parameters set, for example through mbedtls_ecp_group_load().
olen – The address at which to store the number of Bytes written. This must not be NULL.
buf – The buffer to write to. This must be a writable buffer of length blen Bytes.
blen – The length of the output buffer buf in Bytes.

Returns

0 on success.

Returns

MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL if the output buffer is too small to hold the exported group.

Returns

Another negative error code on other kinds of failure.

int mbedtls_ecp_mul(mbedtls_ecp_group *grp, mbedtls_ecp_point *R, const mbedtls_mpi *m, const mbedtls_ecp_point *P, int (*f_rng)(void*, unsigned char*, size_t), void *p_rng)

This function performs a scalar multiplication of a point by an integer: R = m * P.

It is not thread-safe to use same group in multiple threads.

Note

To prevent timing attacks, this function executes the exact same sequence of base-field operations for any valid m. It avoids any if-branch or array index depending on the value of m. It also uses f_rng to randomize some intermediate results.

Parameters

grp – The ECP group to use. This must be initialized and have group parameters set, for example through mbedtls_ecp_group_load().
R – The point in which to store the result of the calculation. This must be initialized.
m – The integer by which to multiply. This must be initialized.
P – The point to multiply. This must be initialized.
f_rng – The RNG function. This must not be NULL.
p_rng – The RNG context to be passed to f_rng. This may be NULL if f_rng doesn’t need a context.

Returns

0 on success.

Returns

MBEDTLS_ERR_ECP_INVALID_KEY if m is not a valid private key, or P is not a valid public key.

Returns

MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.

Returns

Another negative error code on other kinds of failure.

int mbedtls_ecp_mul_restartable(mbedtls_ecp_group *grp, mbedtls_ecp_point *R, const mbedtls_mpi *m, const mbedtls_ecp_point *P, int (*f_rng)(void*, unsigned char*, size_t), void *p_rng, mbedtls_ecp_restart_ctx *rs_ctx)

This function performs multiplication of a point by an integer: R = m * P in a restartable way.

See also

mbedtls_ecp_muladd()

Note

This function works the same as mbedtls_ecp_muladd(), but it can return early and restart according to the limit set with mbedtls_ecp_set_max_ops() to reduce blocking.

Note

This function is only defined for short Weierstrass curves. It may not be included in builds without any short Weierstrass curve.

Parameters

grp – The ECP group to use. This must be initialized and have group parameters set, for example through mbedtls_ecp_group_load().
R – The point in which to store the result of the calculation. This must be initialized.
m – The integer by which to multiply P. This must be initialized.
P – The point to multiply by m. This must be initialized.
n – The integer by which to multiply Q. This must be initialized.
Q – The point to be multiplied by n. This must be initialized.
rs_ctx – The restart context (NULL disables restart).

Returns

0 on success.

Returns

MBEDTLS_ERR_ECP_INVALID_KEY if m or n are not valid private keys, or P or Q are not valid public keys.

Returns

MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.

Returns

MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if grp does not designate a short Weierstrass curve.

Returns

MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of operations was reached: see mbedtls_ecp_set_max_ops().

Returns

Another negative error code on other kinds of failure.

int mbedtls_ecp_check_pubkey(const mbedtls_ecp_group *grp, const mbedtls_ecp_point *pt)

This function checks that a point is a valid public key on this curve.

It only checks that the point is non-zero, has valid coordinates and lies on the curve. It does not verify that it is indeed a multiple of G. This additional check is computationally more expensive, is not required by standards, and should not be necessary if the group used has a small cofactor. In particular, it is useless for the NIST groups which all have a cofactor of 1.

Note

This function uses bare components rather than an mbedtls_ecp_keypair structure, to ease use with other structures, such as mbedtls_ecdh_context or mbedtls_ecdsa_context.

Parameters

grp – The ECP group the point should belong to. This must be initialized and have group parameters set, for example through mbedtls_ecp_group_load().
pt – The point to check. This must be initialized.

Returns

0 if the point is a valid public key.

Returns

MBEDTLS_ERR_ECP_INVALID_KEY if the point is not a valid public key for the given curve.

Returns

Another negative error code on other kinds of failure.

int mbedtls_ecp_check_privkey(const mbedtls_ecp_group *grp, const mbedtls_mpi *d)

This function checks that an mbedtls_mpi is a valid private key for this curve.

Note

This function uses bare components rather than an mbedtls_ecp_keypair structure to ease use with other structures, such as mbedtls_ecdh_context or mbedtls_ecdsa_context.

Parameters

grp – The ECP group the private key should belong to. This must be initialized and have group parameters set, for example through mbedtls_ecp_group_load().
d – The integer to check. This must be initialized.

Returns

0 if the point is a valid private key.

Returns

MBEDTLS_ERR_ECP_INVALID_KEY if the point is not a valid private key for the given curve.

Returns

Another negative error code on other kinds of failure.

int mbedtls_ecp_gen_privkey(const mbedtls_ecp_group *grp, mbedtls_mpi *d, int (*f_rng)(void*, unsigned char*, size_t), void *p_rng)

This function generates a private key.

Parameters

grp – The ECP group to generate a private key for. This must be initialized and have group parameters set, for example through mbedtls_ecp_group_load().
d – The destination MPI (secret part). This must be initialized.
f_rng – The RNG function. This must not be NULL.
p_rng – The RNG parameter to be passed to f_rng. This may be NULL if f_rng doesn’t need a context argument.

Returns

0 on success.

Returns

An MBEDTLS_ERR_ECP_XXX or MBEDTLS_MPI_XXX error code on failure.

int mbedtls_ecp_gen_keypair_base(mbedtls_ecp_group *grp, const mbedtls_ecp_point *G, mbedtls_mpi *d, mbedtls_ecp_point *Q, int (*f_rng)(void*, unsigned char*, size_t), void *p_rng)

This function generates a keypair with a configurable base point.

Note

This function uses bare components rather than an mbedtls_ecp_keypair structure to ease use with other structures, such as mbedtls_ecdh_context or mbedtls_ecdsa_context.

Parameters

grp – The ECP group to generate a key pair for. This must be initialized and have group parameters set, for example through mbedtls_ecp_group_load().
G – The base point to use. This must be initialized and belong to grp. It replaces the default base point grp->G used by mbedtls_ecp_gen_keypair().
d – The destination MPI (secret part). This must be initialized.
Q – The destination point (public part). This must be initialized.
f_rng – The RNG function. This must not be NULL.
p_rng – The RNG context to be passed to f_rng. This may be NULL if f_rng doesn’t need a context argument.

Returns

0 on success.

Returns

An MBEDTLS_ERR_ECP_XXX or MBEDTLS_MPI_XXX error code on failure.

int mbedtls_ecp_gen_keypair(mbedtls_ecp_group *grp, mbedtls_mpi *d, mbedtls_ecp_point *Q, int (*f_rng)(void*, unsigned char*, size_t), void *p_rng)

This function generates an ECP keypair.

Note

This function uses bare components rather than an mbedtls_ecp_keypair structure to ease use with other structures, such as mbedtls_ecdh_context or mbedtls_ecdsa_context.

Parameters

grp – The ECP group to generate a key pair for. This must be initialized and have group parameters set, for example through mbedtls_ecp_group_load().
d – The destination MPI (secret part). This must be initialized.
Q – The destination point (public part). This must be initialized.
f_rng – The RNG function. This must not be NULL.
p_rng – The RNG context to be passed to f_rng. This may be NULL if f_rng doesn’t need a context argument.

Returns

0 on success.

Returns

An MBEDTLS_ERR_ECP_XXX or MBEDTLS_MPI_XXX error code on failure.

int mbedtls_ecp_gen_key(mbedtls_ecp_group_id grp_id, mbedtls_ecp_keypair *key, int (*f_rng)(void*, unsigned char*, size_t), void *p_rng)

This function generates an ECP key.

Parameters

grp_id – The ECP group identifier.
key – The destination key. This must be initialized.
f_rng – The RNG function to use. This must not be NULL.
p_rng – The RNG context to be passed to f_rng. This may be NULL if f_rng doesn’t need a context argument.

Returns

0 on success.

Returns

An MBEDTLS_ERR_ECP_XXX or MBEDTLS_MPI_XXX error code on failure.

int mbedtls_ecp_set_public_key(mbedtls_ecp_group_id grp_id, mbedtls_ecp_keypair *key, const mbedtls_ecp_point *Q)

Set the public key in a key pair object.

Note

This function does not check that the point actually belongs to the given group. Call mbedtls_ecp_check_pubkey() on Q before calling this function to check that.

Note

This function does not check that the public key matches the private key that is already in key, if any. To check the consistency of the resulting key pair object, call mbedtls_ecp_check_pub_priv() after setting both the public key and the private key.

Parameters

grp_id – The ECP group identifier.
key – The key pair object. It must be initialized. If its group has already been set, it must match grp_id. If its group has not been set, it will be set to grp_id. If the public key has already been set, it is overwritten.
Q – The public key to copy. This must be a point on the curve indicated by grp_id.

Returns

0 on success.

Returns

MBEDTLS_ERR_ECP_BAD_INPUT_DATA if key does not match grp_id.

Returns

MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the operation for the group is not implemented.

Returns

MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.

Returns

Another negative error code on other kinds of failure.

int mbedtls_ecp_read_key(mbedtls_ecp_group_id grp_id, mbedtls_ecp_keypair *key, const unsigned char *buf, size_t buflen)

This function reads an elliptic curve private key.

Note

This function does not set the public key in the key pair object. Without a public key, the key pair object cannot be used with operations that require the public key. Call mbedtls_ecp_keypair_calc_public() to set the public key from the private key. Alternatively, you can call mbedtls_ecp_set_public_key() to set the public key part, and then optionally mbedtls_ecp_check_pub_priv() to check that the private and public parts are consistent.

Note

If a public key has already been set in the key pair object, this function does not check that it is consistent with the private key. Call mbedtls_ecp_check_pub_priv() after setting both the public key and the private key to make that check.

Parameters

grp_id – The ECP group identifier.
key – The destination key.
buf – The buffer containing the binary representation of the key. (Big endian integer for Weierstrass curves, byte string for Montgomery curves.)
buflen – The length of the buffer in bytes.

Returns

0 on success.

Returns

MBEDTLS_ERR_ECP_INVALID_KEY error if the key is invalid.

Returns

MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed.

Returns

MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the operation for the group is not implemented.

Returns

Another negative error code on different kinds of failure.

int mbedtls_ecp_write_key_ext(const mbedtls_ecp_keypair *key, size_t *olen, unsigned char *buf, size_t buflen)

This function exports an elliptic curve private key.

Parameters

key – The private key.
olen – On success, the length of the private key. This is always (grp->nbits + 7) / 8 bytes where grp->nbits is the private key size in bits.
buf – The output buffer for containing the binary representation of the key.
buflen – The total length of the buffer in bytes. MBEDTLS_ECP_MAX_BYTES is always sufficient.

Returns

0 on success.

Returns

MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL if the key representation is larger than the available space in buf.

Returns

MBEDTLS_ERR_ECP_BAD_INPUT_DATA if no private key is set in key.

Returns

Another negative error code on different kinds of failure.

int mbedtls_ecp_write_public_key(const mbedtls_ecp_keypair *key, int format, size_t *olen, unsigned char *buf, size_t buflen)

This function exports an elliptic curve public key.

Note

If the public key was not set in key, the output is unspecified. Future versions may return an error in that case.

Parameters

key – The public key.
format – The point format. This must be either MBEDTLS_ECP_PF_COMPRESSED or MBEDTLS_ECP_PF_UNCOMPRESSED. (For groups without these formats, this parameter is ignored. But it still has to be either of the above values.)
olen – The address at which to store the length of the output in Bytes. This must not be NULL.
buf – The output buffer. This must be a writable buffer of length buflen Bytes.
buflen – The length of the output buffer buf in Bytes.

Returns

0 on success.

Returns

MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL if the output buffer is too small to hold the point.

Returns

MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the point format or the export for the given group is not implemented.

Returns

Another negative error code on other kinds of failure.

int mbedtls_ecp_check_pub_priv(const mbedtls_ecp_keypair *pub, const mbedtls_ecp_keypair *prv, int (*f_rng)(void*, unsigned char*, size_t), void *p_rng)

This function checks that the keypair objects pub and prv have the same group and the same public point, and that the private key in prv is consistent with the public key.

Parameters

pub – The keypair structure holding the public key. This must be initialized. If it contains a private key, that part is ignored.
prv – The keypair structure holding the full keypair. This must be initialized.
f_rng – The RNG function. This must not be NULL.
p_rng – The RNG context to be passed to f_rng. This may be NULL if f_rng doesn’t need a context.

Returns

0 on success, meaning that the keys are valid and match.

Returns

MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the keys are invalid or do not match.

Returns

An MBEDTLS_ERR_ECP_XXX or an MBEDTLS_ERR_MPI_XXX error code on calculation failure.

int mbedtls_ecp_keypair_calc_public(mbedtls_ecp_keypair *key, int (*f_rng)(void*, unsigned char*, size_t), void *p_rng)

Calculate the public key from a private key in a key pair.

Parameters

key – A keypair structure. It must have a private key set. If the public key is set, it will be overwritten.
f_rng – The RNG function. This must not be NULL.
p_rng – The RNG context to be passed to f_rng. This may be NULL if f_rng doesn’t need a context.

Returns

0 on success. The key pair object can be used for operations that require the public key.

Returns

An MBEDTLS_ERR_ECP_XXX or an MBEDTLS_ERR_MPI_XXX error code on calculation failure.

mbedtls_ecp_group_id mbedtls_ecp_keypair_get_group_id(const mbedtls_ecp_keypair *key)

Query the group that a key pair belongs to.

Parameters: key – The key pair to query.
Returns: The group ID for the group registered in the key pair object. This is MBEDTLS_ECP_DP_NONE if no group has been set in the key pair object.

int mbedtls_ecp_export(const mbedtls_ecp_keypair *key, mbedtls_ecp_group *grp, mbedtls_mpi *d, mbedtls_ecp_point *Q)

This function exports generic key-pair parameters.

             Each of the output parameters can be a null pointer
             if you do not need that parameter.

Note

If the private key or the public key was not set in key, the corresponding output is unspecified. Future versions may return an error in that case.

Parameters

key – The key pair to export from.
grp – Slot for exported ECP group. It must either be null or point to an initialized ECP group.
d – Slot for the exported secret value. It must either be null or point to an initialized mpi.
Q – Slot for the exported public value. It must either be null or point to an initialized ECP point.

Returns

0 on success,

Returns

MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.

Returns

MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if key id doesn’t correspond to a known group.

Returns

Another negative error code on other kinds of failure.

int mbedtls_ecp_self_test(int verbose)

The ECP checkup routine.

Returns: 0 on success.
Returns: 1 on failure.

struct mbedtls_ecp_curve_info

#include <ecp.h>

Curve information, for use by other modules.

The fields of this structure are part of the public API and can be accessed directly by applications. Future versions of the library may add extra fields or reorder existing fields.

Public Members

mbedtls_ecp_group_id grp_id: An internal identifier.

uint16_t tls_id: The TLS NamedCurve identifier.

uint16_t bit_size: The curve size in bits.

const char *name: A human-friendly name.

struct mbedtls_ecp_point

#include <ecp.h>

The ECP point structure, in Jacobian coordinates.

Note

All functions expect and return points satisfying the following condition: Z == 0 or Z == 1. Other values of Z are used only by internal functions. The point is zero, or “at infinity”, if Z == 0. Otherwise, X and Y are its standard (affine) coordinates.

Public Members

mbedtls_mpi private_X: The X coordinate of the ECP point.

mbedtls_mpi private_Y: The Y coordinate of the ECP point.

mbedtls_mpi private_Z: The Z coordinate of the ECP point.

struct mbedtls_ecp_restart_ctx

#include <ecp.h>

General context for resuming ECC operations.

Public Members

unsigned private_ops_done: current ops count

unsigned private_depth: call depth (0 = top-level)

mbedtls_ecp_restart_mul_ctx *private_rsm: ecp_mul_comb() sub-context

mbedtls_ecp_restart_muladd_ctx *private_ma: ecp_muladd() sub-context

struct mbedtls_ecp_keypair

#include <ecp.h>

The ECP key-pair structure.

A generic key-pair that may be used for ECDSA and fixed ECDH, for example.

Note

Members are deliberately in the same order as in the mbedtls_ecdsa_context structure.

Public Members

mbedtls_ecp_group private_grp: Elliptic curve and base point

mbedtls_mpi private_d: our secret value

mbedtls_ecp_point private_Q: our public value